![]() |
![]() |
||||||||||||||||||||||||
![]() |
|||||||||||||||||||
![]() |
![]() |
![]() |
|||||||||||||||||
![]() |
![]() |
||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
| Click for PDF | |||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
![]() |
![]() |
![]() |
|||||||||||||||||
![]() |
|||||||||||||||||||
DP0 / AL4 Cooler Adapter
This Adapter allows for the fitting of an auxiliary Oil Cooler to vehicles fitted with a DP0 or AL4 transmission.
These transmissions are known to run hot and our research has shown around a 20% reduction in the transmission running temperature.
Simply remove the existing Heat Exchanger, re-using the original Banjo bolt and O’rings will allow the connection of the Auxiliary Cooler hoses. Then re-fit the heater hoses to by-pass the original heat exchanger.
AE Autotech LeakTester
Stop those irritating and costly external leaks before your unit is fitted into the car by using a simple method of 'air decay'.
Simply feed a regualted air supply to the transmission and torque converter normally via the breather. Seal all open areas using either the original part or a suitable bung. When the unit is full of air close off the tap and watch the air pressure gauge for pressure drop. Even small leaks show up quickly.
Simple but effective!
AE Autotech Vacuum Tester
Check for Valve body bore wear simply by using this vacuum tester. This bench tool is easy to operate and comes with full user instructions and a simple guidance chart to follow. This is the starting point for collecting data for future reference.
Simply adjust the vacuum and record the drop off caused by worn or ill fitting valves. This is a must have tool for any transmission shop wishing to restore their valve bodies back to original specification.
Aisin Warner SL Solenoid Cleaning Tool Kit
This tool kit from AE Automotive Technology allows for the complete overhaul of the Aisin 5 and 6 speed SL solenoids. Apart from incorrect calibration of the 5 speed SL solenoids, the main concern with them is dirt ingress. This tool kit has been specially designed to return the canister to original, then closing the entire solenoid leaving it as if it had never been apart in the first place.
The tool kit comes complete with video instructions. Very soon you will be fitting clean, working solenoids to your valve body overhaul.
6 Piece Cone Set
This package contains all you need to fit pistons using the revolutionary new Cone System. and comprises of 6 various size cones.
Cone System Starter Kit
This package contains all you need to fit pistons using the revolutionary new Cone System. It comprises of 6 various size cones, a 2 Pack of Original & Extreme and an instructional DVD. This DVD contains all the demonstration videos on one disc. These videos will soon be available for download from this Website.
Seal-e-Zee Extreme
Essential for those extra tight seals! Seal-e-Zee Extreme is a more intense form of Seal-e-Zee Original that does not contain lubricating qualities. For this reason Seal-e-Zee Extreme should only be used after first applying Seal-e-Zee Original